Quality, Custom-built Stainless Steel, Intermediate
Bulk Containers (IBC) and Replacement Parts.

Intermediate Bulk Container | Tote® | Tank

Quality manufactured Intermediate Bulk Containers; IBC Totes in sizes from 120 to 793 gallons for transporting hazardous materials to 49 CFR requirements. There are standard sizes or a bulk container can be fabricated to your unique dimensions. Material construction is carbon steel and 304/316 stainless steel containers or to your specifications.

 

All IBC’s Intermediate Bulk Containers are fabricated, constructed and UN approved to 49 CFR 31A. Each tank is tested and labeled with the corresponding stainless steel information and unique serial number and registered in AMI’s computer data base for tanks. With this UN certification the tanks are DOT approved for transporting and handling hazardous materials.

 

Standard IBC transportable tanks are produced with common components. Material is heavy duty 10 gauge 304 stainless steel construction with a 2B finish. General tanks have a base dimension of 42” x 48”, but standard tanks can also be produced with 42” x 42” or 48” x 48” base dimensions.

 

Standard Intermediate Bulk container tanks include; one piece slope bottom head towards the outlet valve, with a one piece standard ball valve and shipping plug. To protect the outlet valve there is a formed valve guard the length of the tank. The top head is constructed with a 22-1/2” manway opening and a portable tank (PT) cover, clamp ring, EPDM multi-seal gasket and a safety vent plug. The top head also includes four heavy duty ¼” thick lift lugs and leg positioners. Additional standard features include common safety labels, formed oval legs and a stainless steel ID/retest tag.

 

product

 

Customization

Another area of AMI’s expertise is Intermediate Bulk Containers with special requirements and custom fabrication. Both the top and bottom heads can be modified with approved custom components for your product and process. The tank interior can be processed with ground seams, and the IBC can be passivated or electropolished.

 

Custom components for the IBC Tote® top head can include cam and groove fittings, male and female threaded pipe fittings and either light or heavy duty sanitary fittings. Special openings including manways and sight tubes are also available. Any requirement that your process needs can be accomplished.

 

The tank bottom head can be fabricated without a valve or with the valve of your choice. The standard valve can be changed to include a smaller or larger size depending on the application. Other options include sanitary valves or butterfly valves in various sizes and connections. AMI’s most popular valve is a sanitary connected 2” 3 piece valve with a 15 degree quick connect male adapter outlet.

 

The tank interior weld seams can be ground for a tank interior that is easier to clean and maintain. AMI’s production team will grind the weld seams flush to the tank wall and polish to your specifications. Additional special features are passivating the tank inside and outside, and electropolishing to a clean bright finish to the specification of you choice.

 

AMI’s standard and custom IBC tanks are widely used for many applications and industries. The paint and coatings industry use AMI IBC’s for bottom coat, top coat and ISO applications in the automotive industry. Other paint applications include paint and varnish; special processing, adhesives, metal fabrication, water process and electric lighting companies. Many also use AMI’s mixer agitators and drive motors to maintain the products blending in the tank before and after use. Other industries that use AMI tanks include; pharmaceuticals, oil and gas, food processing and many other applications where IBC Tote® tanks can be used to lower cost and improve efficiently.

 

Call AMI today @ 877-629-0091
for personal assistance in specifying a standard
or custom IBC for your application.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

product

 

 

 

 

 

 

 

 

 

 

Container Parts

Tank

Lanyard 110029

Aircraft Cable Lanyard, Heavy Duty 1/8” Diameter Vinyl Covered Steel with Crimp Sleeves

Bulk Cable and Crimp Sleeves are available. Part #110029
Crimp Sleeves - Part # 110761
Cable - 250' spool - Part #110762

stainless steel valve

Valves

A valve fitted to the bottom outlet for every application. Flush mount, 3 piece ball valves, butterfly with sanitary connections and standard 2 piece ball valves.

More...

 

Tank

Agitators for Totes

Heavy duty stainless steel mixers for transportable IBC containers with standard sized manways. Custom designed based on the container size and product.

More...

 

sure drain totes

Gaskets

A variety of replacement gaskets are available for multiple IBC applications. AMI also offers an assortment of material construction for the gaskets required including silicone free.

More...

Tank

I-Line Clamp

2” I-Line Bolted Clamp in 304 SS. Many other sizes and styles available, call for details.
Part #110651

 

process tank

Container Decals

Chemical resistant decals for IBC Totes.

More...

 

 

 intermediate bulk container

Nut & Bolt

Clamp Ring Bolt Grade 5 (110676) and Nut Grade 2 (110587) for use with Stainless Steel or Carbon Steel Clamp Rings, Zinc Plated
Part # 110676-110587

 intermediate bulk container

Covers for IBC

Intermediate Bulk Containers

Construction: 304 Stainless Steel, 316 Stainless Steel,

More...

 

Tank

Clamp Rings

Carbon steel or Stainless steel construction, DOT and UN31-A approved, heavy duty for all container needs. AMI’s clamp ring fits a standard 22-1/2” diameter manway chime or 55 gallon drum. These clamp rings can be supplied with or without required fasteners.

110527 113842

More...

 

Tank

2" Dust Cap

Quick Disconnect Dust Cap Assembly with Buna Gasket.

More...

 

Tank

IBC Valve Adapter

AMI's 115403 adapts your standard 2" NPT outlet to a 2" I-Line fitting, perfect for incorporating AMI's 111111 ball valve. Part #115403

Tank

Low Profile Arms

Genuine metal replacement parts for damaged Dust Caps. Low Profile Arms, Finger Rings and pins can be obtained separately or in Kit form.